Hi there! And welcome to Craft Goodies. I'm thrilled that you've stopped by and hope you find something here that makes your visit a great one...

Friday, December 10, 2010

Reindeer Upgrade and a Sleigh!

This is what happens when the project that I want to do becomes the project I'm going to do until the first project is do-able...
 
I totally "pimped" my reindeer!
 


I took my 2x4 reindeer and gave him a body, legs, a girl-friend, and a ride! Yeah, I'm telling you, today I impressed myself with this one.

Want details? Here you go:


2x4 block cut to 3.5 x 3.5 inches {head}
2 2x4 blocks cut to 3.5 x 1.5 inches {hooves}
1" diameter dowel cut into two 6 inch lengths {legs}
2x6* block cut to 5 x 7 inches {body}
I used a leftover piece of paint stick for the nose piece about 2" long

*I actually used the 2x10 board that I bought for the sleigh and just split it in half,
hence 2 reindeer instead of 1!
1. Paint and sand the edges of each block.
2. Drill placement holes into body and feet, holes for antlers into head.
I used a 1/2" bit for the antlers, and a 1" boring bit for the dowels.
I drilled completely through the feet and about an inch and a half into the body.

3. Assemble the body. Glue dowels into place and let completely dry.
 


*Be sure to check that your reindeer is level before and after adding the glue!
 
 



4. While the body is drying finish the heads.
*I cut out an extra ear piece to use for a tail.
 

5. Glue on the tail and head pieces. If you wish, the wood is thick enough
 to use a screw or two. Just be sure to pre-drill pilot holes.

Add a fun collar and other embellishments and your reindeer is good to go!

To make the sleigh I cut down a 2x10 inch piece of  wood with my band saw.
2x4 block cut to 8 inches long
and 1" diameter dowel cut to two 3" lengths


I originally kept this really square to match the shape of the deer. Still an option if you only have a miter or jig saw. This piece of wood is to thick for a scroll saw-you'll kill your blade and it will take forever to cut!

Follow the same basic instructions for the sleigh as you did for the deer.
Paint and sand.
Drill placement holes-be sure they are in the same place on the sleigh and runner piece.
Assemble with a little glue.
Add your embellishments and your done!
*I ran a length of ribbon from the front of the sleigh to each of the deer collars to connect the pieces.

Have fun and Happy Crafting!



I linked up to these fantastic blogs! 
 

Photobucket

Photobucket








Join  us Saturdays at tatertotsandjello.com for the weekend wrap up    party!

Post a Comment
Related Posts Plugin for WordPress, Blogger...